Journals of a Time Traveller

I don't have to give these two up. My great grandfather Fred Smith, holding the hand of his daughter and my late grandmother Doris Smith around about 100 years ago in Norwich.

Trimming the branches

I make mistakes.  Genealogy is rarely perfect.  A part of the fun of the pastime, is in validating, verifying, and proving descent.  Sometimes though, the desire to simply add branches and histories, overtakes the quality control.  I'm guilty of that.  I've recently made a number of mistakes in my genealogical research.  A very good researcher would not make those mistakes in the first place.  They would research methodically and carefully, recording every data, looking for correlations - before they accept descent.  I on the other hand, still have a lot to learn.  However, I am willing to sometimes go back, check, check again, and if I'm not happy, remove ancestors, remove branches, remove histories.

With my recent return to genealogy, and my baptism into internet genealogical resources, I've witnessed the pitfall of the new age of research.  Family History websites push other people's trees and research at you.  However, so, so many of those that I've looked at, are erroneous, poorly sourced, and copied around like a mutated gene.  I want to create an ancestral record and history that is better than that.  I have an awful lot of work to do.

My recent mistakes have been shameful.  I made the above mistake - allowing MyHeritage.com to add branches to a couple of lines.  On checking their sources, and researching for myself, I couldn't validate the connections.  I removed them.

I wrongly identified a service record as belonging to a great grandfather.  That one hurt.

I extended my paternal surname line with too much haste.  I grabbed at a probable ancestor.  Later checks revealed a doppelganger.  I've had to go back to the drawing board, removing three generations from that line.

I don't regret these mistakes.  I'm always checking for validity.  A good quality family tree is better than a massive, old, but incorrect record.  The fun is after all, in the research, and that seems to go on forever.

I'm continuing to have some success in adding ancestors to the tree, while at the same time I'm verifying, adding sources and citations, and adding flesh to bones.  I've been hitting Ancestry.co.uk and FindmyPast.com pretty hard while I can.  I also sometimes use the NORS facility on the Norfolk FHS website.  Finally, I've collected my old paper records and certificates from my old days in pre-Internet genealogy.

In some cases I have removed some proposed ancestors.  During a moment of weakness, I allowed the My Heritage website to add some branches to my tree from those of other researchers.  I wont do that again.  Looking closely, and checking for sources myself, I disagree with the authenticity of them.  I also found that I was barking up the wrong service record for my great grandfather.  I'll learn by these mistakes.

New branches or ancestors that I've recently uncovered include the Particular Baptist Tovel family of Suffolk, and the Daynes of Garvestone, Norfolk.

I found another handy feature on the open source Gramps genealogy software.  A Number of Ancestors Report.  It generated the below stats for me.

I think that it is typical for a family tree - recorded ancestors as a percentage of the biological generation, really start to rapidly fall away from Generation 8 (G.G.G.G.G Grandparent Generation).  Until then, most of the missing ancestors are down to illegitimacy events:

Number of Ancestors Report 11 April 2016

Generation 1 has 1 individual. (100.00%)

Generation 2 has 2 individuals. (100.00%)

Generation 3 has 4 individuals. (100.00%)

Generation 4 has 8 individuals. (100.00%)

Generation 5 has 16 individuals. (100.00%)

Generation 6 has 29 individuals. (91%)

Generation 7 has 49 individuals. (77%)

Generation 8 has 37 individuals. (29%)

Generation 9 has 26 individuals. (11%)

Generation 10 has 16 individuals. (3.5%)

Generation 11 has 4 individuals. (0.4%)

Total ancestors in generations 2 to 11 is 191. (9.53%)

The above map has been modified from an original copied from © OpenStreetMap contributors

I have plotted my ancestral places that are tagged in my Gramps genealogical GEDCOM database.  These Places represent events -births, baptisms, marriages, or residence, etc.  These Places  belong to my direct ancestors, although they may also include siblings of ancestors.  Overall, I have modified this map in order to illustrate the distribution of my East Anglian (almost entirely of the County of Norfolk, with a few over the border in Suffolk) ancestors over the past 350 years - as so far revealed by paper genealogical research.

The BLUE markers represent the places of my father's recorded ancestors.  The RED markers represent the places of my mother's recorded ancestors.  The more events recorded for any place, the larger the marker.  You can click on the image in order to see a full resolution image.

The RED markers include pretty much all events for my mother's ancestors, as presently recorded in my family history database.  She has no recorded ancestry from outside of Norfolk, for the past 350 years.  She has an incredibly strong Norfolk ancestry.  Particularly in the East of Norfolk.

The BLUE markers do not cover all of my father's recorded ancestors, as I have also detected ancestry for him in Oxfordshire, London, and possibly Lincolnshire.  These ancestors lived outside of the mapped area.

When my mother and father initially met each other in 1956, they believed that they came from quite different parts of Norfolk, from opposite sides of the City of Norwich, with my father moving from East Dereham to my mother's neighbourhood in the Hassingham area.  Yet this map suggests that over the past 350 years, some of their ancestors have lived much closer.  The chances of them both sharing common ancestry during the Medieval, or even more recently are good.

This might support the findings of the POBI (People of the British Isles) 2015 study, that not only emphasised the homogeneous nature of the English, but also suggested that the old Anglo-Saxon kingdoms could still be detected as localised gene pools to today.

I have previously created the below map, using red dappling to mark out the main zone of my mother's ancestry, onto a map of East Norfolk, as it would have appeared during the 5th Century AD, before sea levels fell, and drainage works created the more recent Norfolk coast:

My hypothesis is that my mother's ancestors clustered in an area of East Anglia, that would most likely have experienced an influx of North Sea immigration between the 4th and 11th centuries AD from Frisia, and perhaps Angeln and Denmark.

I also modified the below map from Wikimedia Commons.  Attribution is: By Nilfanion [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0) or GFDL (http://www.gnu.org/copyleft/fdl.html)], via Wikimedia Commons.  This map, as the legend states, illustrates the distribution of my recorded direct ancestors (bother on my father's and mother's sides are in RED) across the wider area of England at a single generation level, based between 1756 to 1810.  It suggests a combined ancestry, concentrated in Norfolk, East Anglia, but with a few lineages in Wessex / Mercia.

My experience

Gramps 4.2

Gramps is available free, and Open Source on both Windows and on Linux.  It may be available for other platforms as well, I don't know.  I've installed Gramps 4.2 onto my Windows 7 64 bit PC.  I've also installed Gramps 4.0 onto my Lubuntu 14.04 (Linux) netbook.  The screenshots that I've uploaded to this post, were taken on the Windows PC.  There are differences between my two versions on two platforms, and I won't go into all of those.  I'm mainly interested in updating and generating .ged GEDCOM files, bearing in mind, my past experiences in losing data over the years.  As long as I don't faff around too much on attributes carried by Gramps native features, that are not carried over by the GEDCOM format, the programs both run great.  I haven't yet played too much with images.  My understanding is, that you need to host the binary files in folders on your hard drive - then GRAMPS  merely points / looks at them.  That isn't something (as I presently understand) that is supported under GEDCOM.

Gramps is a database.  Like any database, it revolves around objects, attributes, and tags.  Some glossy family history software might dumb all of this down a bit.  They want to catch the mass market.  Gramps does not shy away though.  It's real magic is that it offers so many different ways of entering data, in ways that can be tracked to resources, citations, notes, places, even coordinates.  It's a piece of free software that the geek genealogist should love.  Typical of Open Source, it is more functional than pretty.  It's a piece of software that can be daunting at first.  However, if you are methodical, and reasonably pooter-literate, give it a little perseverance, and you soon start to love it.  It's features will encourage tidiness and well documented research.  Why spend out on EULA licensed software?

This week, I've been investigating the Places objects.   I've discovered that you can geo-tag your places - that can be referenced to events, such as baptisms, deaths, census records, etc.  I must have hundreds of places for my family database of 1,435 ancestors / relations.  None-the-less, I've been spending too much time on the pooter, tidying up my place data, and by referring to OpenStreetMap.org, copy and pasting longitudes and latitudes into all of them, along with place-type, alternative names, etc.  It's all about making a better GEDCOM, a better family history database.

So why bother?  Well for one  it's going to be a vastly improved record of my family.  A healthy database.  Not only that, but GRAMPS allows me to plot my ancestors locations - or rather, the locations of "events":

I can see at least one error there - in the sea off the Kent coast.  Some more tidying to do.  By the way - the mapped events include the paper ancestors on my kid's family tree, including those of my Ex.  Alternatively, I can browse the places, hit an option, and in a browser, up pops the location on OpenStreetMaps!

There are many more features to explore on Gramps.  I'll get to them in time.  I've uploaded several of the fancharts that it can generate already on this blog.  There are a range of other reports that it can produce, and web pages.  The generated website is incredibly functional.  It took a couple of minutes to generate pages for every one of my 1,435 family tree individuals.  All with trees galore.  All that I would need is a web host.

As for stability.  I've seen someone complain that it slows down.  Nonsense.  It's fine even with my extensive database.  My Windows version is very slow to launch though - not so the Linux version.  However, when it's up, even on Windows,, it is perfectly functional and very fast.

Some people are also confused on how to load a GEDCOM file at start.  I was.  It's simple.  You need to first create a blank family tree file from the manager.  Then you can import your GEDCOM into it.  You don't see the Import/Export functions until you have first loaded a family tree - just make it a new blank file.   Once you have created a family tree, and imported a GEDCOM - be careful to use that file next time, and not do as I did - import the GEDCOM again.  You'll end up with two of each individuals.  Always back up before and after making any edits.  I like to mail a backup to myself on webmail, so that the GEDCOM is also backed up on two webmail servers.

GEDexplorer

That geo data that I produced on Gramps, is carried over on GEDCOM to other databases and platforms.  I use the GEDexplorer v1.24 ap on my Android smartphone.  This app allows me to view my GEDCOM files on my phone!  It cost me a couple of quid from the Play Store, but it was money well spent. 

The above screenshot shows a view of one part of my tree - the ancestors of my great grandfather Sam.  It's a really nice feature of GEDCOM files and this software, that you can open up your database, look through trees, fan charts, or just the data itself, browsing through ancestors.  Handy if you just get a spare hour here or there to research with - but no lap top!  Easy quick reference of your entire database from a phone.

You see, it's all there.  The beauty of GEDCOM format has reached from my Windows 3.1 machine, to my Sony Z3 phone.  That's a rugged file format.

Now to the point of this entire post really.  Those hours that I've wasted away on giving geo-tag provenances to all of my ancestral places?  The GEDCOM picks up the latitude and longitudes, and GEDexplorer displays them.  Just click on any hyperlinked ancestral event place, such as my great grandmother's place of birth above, and ....

and I can hit the link and look at it in more detail using Google Maps.  Hell, I could even navigate to the actual place.